For many years AER was asked for something small for electric bass... simple, powerful and with great performance. A difficult task.
And they did it - the AER Bottom Line Amp One. A superb 10" in a bass reflex enclosure, with a serious 200 watt power amp, a
more than sufficient power-supply and extended dynamic headroom.
Upon first glance, you might think this tiny combo wouldn't be capable of producing high quality output. Well prepare to be blown away when you plug in.
It's a powerhouse which delivers stunning volume level throughout the entire spectrum - low B-string and up.
|
Configuration: one 10" woofer neodymium magnet
Input Connection: 1/4" with pad (high/low attenution)
Features: ground lift, headphone output, line out, sub out, footswitch (muting and effect loop), send, return, insert pre/post EQ, aux in, adjustable DI-out
EQ: 3 band with parametric mids,
Colour - mid-cut-treble-boost-filter
Bass Boost: +10 dB / 55 Hz
Tonal Balance: the tone balance enables bass or treble emphasis or a combination of both
Compressor: with adjustable ratio and threshold
Output Connection: speaker, Line, headphone
Power Output: 200 watts
Cabinet: 18 mm (0.70") Finnish birch plywood
Finish: waterbased acrylic, black spatter finish
Handle: top mounted handle
Dimensions: 325mm x 375 mm x 295 mm (12.80" x 14.80" x 11.60") HxWxD
Weight: 13.50 kg, 29.50 lbs.
Accessories: padded gigbag (included)
Price: $1799.00
|
Amp two is the second member of the Bottom Line combo bass amps. In line with Amp one, but with more defined speaker system and more power.
A 12" neodymium woofer for quick and full bass response combined with a 4" mid-high direct radiating speaker for gentle trebles allows a wider range of sounds from funk to pop and rock to jazz.
As further difference to the Amp One the signal path is lead trough adjustable compression pre EQ to provide even more dynamic headroom.
|
Configuration: one 12"woofer neodymium alloy magnet plus a 4" mid-high direct-radiating speaker
Input Connection: 1/4" with pad (high/low attenution)
Features: ground lift, headphone output, line out, sub out, footswitch (muting and effect loop), send, return, insert pre/post EQ, aux in, adjustable DI-out
EQ: 3 band with parametric mids,
Colour - mid-cut-treble-boost-filter
Bass Boost: +10 dB / 55 Hz
Tonal Balance: the tone balance enables bass or treble emphasis or a combination of both
Compressor: with adjustable ratio and threshold
Output Connection: speaker, Line, headphone
Power Output: 240 watts
Cabinet: 18 mm (0.70") Finnish birch plywood
Finish: waterbased acrylic, black spatter finish
Handle: top mounted handle
Dimensions: 500mm x 420 mm x 350 mm (19.70" x 16.50" x 13.80") HxWxD
Weight: 23.50 kg, 51.70 lbs.
Accessories: padded gigbag (included)
Price: $2299.00
|
Amp Three follows the concept of Amp One being small, rich and powerful based on a one way speaker-system. It also offers a superb mix between size and power and features for professional use.
Equipped with 2 x 8" heavy duty bass-speakers, it enhances the low mids and offers a more open, transparent tone with the neccessary strength and focus to cut through.
|
Configuration: 2 x 8" heavy-duty bass-speakers
Input Connection: 6.3 mm (1/4") input jack socket as high impedance line input stage with pad (high/low attenution)
Features: ground lift, headphone output, line out, sub out, footswitch (muting and effect loop), send, return, insert pre/post EQ, aux in, adjustable DI-out
EQ: 3 band with parametric mids,
Colour - mid-cut-treble-boost-filter
Bass Boost: +10 dB / 55 Hz
Tonal Balance: the tone balance enables bass or treble emphasis or a combination of both
Compressor: with adjustable ratio and threshold
Output Connection: speaker, Line, headphone
Power Output: 200 W / 8 ohms, dynamic control
Cabinet: 18 mm (0.70") Finnish birch plywood
Finish: waterbased acrylic, black spatter finish
Handle: top mounted handle
Dimensions: 366 mm x 416 mm x 315 mm (14.41" x 16.38" x 12.40" HxWxD)
Weight: 16 kg, 34.97 lbs.
Accessories: padded gigbag (included)
Price: $1999.00
|
|
|
|
