|
|
|
|
The M-288 Bass Octave Deluxe is a dual-voice octave pedal from MXR Bass Innovations that offers
organic analog tone, true bypass, and a wide variety of tone shaping options. Powered by a single 9 volt battery, MXR's
18 volt Constant Headroom Technology (CHT) provides studio-performance headroom and superior tracking.
Use the Dry
knob to mix your direct bass signal with the octave effect, or hit the Mid+ switch to add up to 14dB of internally adjustable
low-mid punch or pop. Bass players will love the two separately processed and individually voiced octave controls-Growl
(for throaty, midrange octave-below tone) and Girth (for deep and smooth octave below).
The Bass Octave Deluxe comes in a durable, lightweight aluminum casting and has the same high-quality jacks and switches
that have made MXR pedals the road-ready standard on pedal-boards around the world for 30 years.
Input: 1/4"
Input Imdepance: 1M ohm
Controls: Growl, Dry, Girth, MID+, On/Off Footswitch (True Bypass)
MID+ Switch: selectable 400Hz or 850Hz +4dB to 14dB)
Octave Frequency Bandpass: 8Hz to 46kHz, -3dB
Output: 1/4"
Power: single 9 volt battery, or 9VDC adapter
Price: $179.00
|
|
The Bass Envelope Filter delivers classic, analog, envelope filter sounds in an easy-to-use and compact pedal designed
specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals,
so you can bring the funk without losing the low end. It's wide range of filter tones can be shaped with the Decay and
Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack as well as adjust for passive
or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps,
and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size
aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.
Input: 1/4"
Input Imdepance: 1M ohm
Controls: Dry, FX, Decay, Q, Sens, On/Off Footswitch (True Bypass)
Output: 1/4"
Power: single 9 volt battery, or 9VDC adapter
Price: $179.00
|
Radial Bigshot Mix
The BigShot MIX is designed for the more demanding guitar or
bass player that wants to introduce cool effects pedals to the signal path without the noise and artifacts caused by their 'less
than ideal' circuitry and cheap buffers.
The MIX begins with 100% discreet, pure class-A circuitry to ensure the natural tone of the instrument is maintained. On the connector
panel, a simple effects loop with send and return 1/4" jacks make connecting easy. A recessed MIX control lets you adjust and set the
exact balance between your dry sound and the effect. Best of all, the natural tone of the instrument is maintained.
Like all Radial pedals the MIX is made road tough with 14 gauge steel construction, double sided PC board and a heavy duty footswitch.
Price: $159.99 |
|
The BassBone features two input channels with a footswitch
selector for instant access to two basses on stage. It can be used with
one bass and allow switching between two different tonal settings, or
with two basses, each with a distinct tonal setting. Features include
a power-booster with variable gain, switchable effect loop, Tuner output,
Ground Lift.
Uses: electric and acoustic basses
Input: two 1/4"
Controls: Input 1 Volume, Input 2 Volume, Boost level (+8dB)
EQ: Channel
1 - Flat, Shape 1 (+3.7dB @ 75Hz, -5.1dB @ 350Hz, +2.7dB @ 4.3kHz) Shape
2 (+3.7dB @ 75Hz, -6.3dB @350Hz, +11dB @5.6kHz)
Channel 2 - (±12dB @
75Hz, ±10dB @ 470Hz, ±16dB @ 5.6kHz)
Switches: Input Toggle, Boost Assign (boost, effect loop, both) Ground
Lift
Power: 15VDC 400mA
Outputs: Main 1/4", XLR (DI), 1/4" Tuner
Price: $269.00 |
|
The Sadowsky Outboard Preamp features the original
Sadowsky bass preamp along with XLR DI output, Tuner output, Ground Lift,
On/Off and Mute footswitches. The chassis has been redesigned as a pedal
style box for easy floor operation with easy to see LED function indicators.
The preamp can be used for any bass and will add fat low end and nice
high end clarity.
Uses: electric and acoustic basses
Input: 1/4",
330K ohm
Controls: Volume, Treble, Bass
EQ: Treble (+13dB boost @ 4kHz),
Bass (+13dB boost @ 40Hz)
Frequency: 5Hz to 50kHz
Switches:
On/Off and Mute footswitches with LED indicators, Ground Lift
Outputs:
Main 1/4", XLR (DI), 1/4" Tuner
Power: single 9 volt battery,
or AC adapter (optional)
Battery: 90 hours. Low Battery LED Indicator.
Easy access battery compartment
Size: 2.25"H x 4.5"W x 4.5"D
Weight: 1.5 lbs.
Price: $259.00 |
The Sans Amp Bass Driver DI is capable of delivering
fat vintage tube tones, bright modern slap sounds, gnarly distortions,
and all in between. This pedal is a great tool for bassists, both live
and in the studio.
Uses: electric and acoustic basses Input: 1/4"
Controls:
Level, Treble, Bass, Presence
EQ: ±12dB Treble, Bass
Switches: On/Off
and Mute footswitches with LED indicators, Ground Lift
Outputs: Main & Parallel
1/4", XLR (DI)
Power: single 9 volt battery, or AC adapter (optional)
Size: 1.5"H x 4.5"W x 3.5"D
Weight: 14 oz.
Price: $215.00 |
|

The Sans Amp Programmable Bass Driver DI features all
analog circuitry with the same controls as its predecessor; Drive, Bass,
Treble, Presence, Blend, and Level. Using this pedal is a breeze. Just
tweak the knobs until you find a sound you like, then double tap on a
footswitch, and it's saved to that channel. This pedal is a great tool
for both live and studio use. It's also a great front end device for
the new Bergantino IP Series self-powered bass cabinets!
Power: single 9 volt battery, or AC adapter (optional)
Price: $235.00
|
For bassists who like to switch it up on stage, the SansAmp Bass Driver Deluxe is the ultimate live tool for the bass-hopping, preset-stomping player.
The Deluxe is all about fast delivery of monster Tech 21 bass tones in the fray of a live performance. Dual inputs enable two instruments to be on-line
and ready to go with a pop-free selector. You can program three custom tones for each input, or use all six for a single instrument. You can also program
the FX loop to engage your favorite effect with a particular setting and the Deluxe will bring it every time that preset is selected.
Take a SansAmp Bass Driver into the studio and plug directly Into the board for premium tones without miking.
Gig with a SansAmp Bass Driver running it directly through the house PA without using a separate amp.
Set-up with a SansAmp Bass Driver, power amp and speaker cabinet, and simultaneously run directly through the house PA for planet-dominating sound.
Power: single 9 volt battery, phantom power, or AC adapter (optional)
Price: $299.00 |
|
The tower of power pumping through a stack of 10-inchers is the legendary bass tone for players who enjoy being heard. From chunky funk with the ubiquitous
flip top, to the higher gain growl of indie rock. Still need more? Lean on the Character control for the fat distortion of Crimson and King's X.
It all sounds massive DI. Clean SVT® thump to dirty earthquaking rump, you dial it in.
Can be used as a stand-alone pre-amp to drive a power amp, a studio mixer, or a PA system, with the rich SansAmp cabinet emulation that sounds huge - even straight
into a computer soundcard. Or plug them into your amp to take your tone somewhere special.
Power: single 9 volt battery, phantom power, or AC adapter (optional)
Price: $169.00 |
The Deluxe version of the SansAmp VT Bass features a combination of a warm, all-analog signal path and convenient digital recall. There are 6 program locations
and dual inputs for two instruments to be on-line, ready to go. Create three custom tones for each input or use all six locations for a single instrument. And you can program the FX
loop to engage your favorite
effect each time a so-designated preset is selected. Super simple to operate, changes can easily be made on the fly --without having to refer to the owner's manual. You just turn the
knobs to a setting you like, double click on a footswitch and it's saved in that channel. You can custom tweak and program six of your personal sounds, from vintage clean to gnarly
overdrive to crushing distortion.
Power: single 9 volt battery, phantom power, or AC adapter (optional)
Price: TBA Available July |
New super compact Pedaltrain For the quick weekend gig, or for players who use a
small number of pedals and like to travel light! The same great construction as our
award winning line of Pedalboards. Includes case and lifetime warranty.
Frame Size: 20x7x2 inches / weight 2.5 lbs.
Soft Case: 21x8.5x6 inches / weight 3.5 lbs.
Price: $89.99 |
|
The PT-2 Junior features a compact pedalboard frame with a durable padded gigbag made of cordura
nylon, with adjustable shoulder strap and gusseted exterior storage pocket for cables, straps, etc.
The PT-JR is perfect for players who want to keep their setup small and simple,
or for the quick weekend jam where you need a take along a few of your "must have" tones.
Frame Size: 17x12.5x2 inches / weight 3 lbs.
Soft Case: 19x15x5 inches / weight 2 lbs.
Price: $119.99 |
This is the flighcase version of the PT-2 Junior.
Frame Size: 17x12.5x2 inches / weight 3 lbs.
Hard Case: 19x18x8 inches / weight 11 lbs.
Price: $219.99 |
|

The PT-2SC comes with a heavy duty cordura nylon gig bag with solid
panels sewn inside the walls, plus a large and roomy gusseted pouch on the exterior.
Frame Size: 24x12.5x2 inches / weight 4 lbs.
Soft Case: 26x15x6 inches / weight 3 lbs.
Price: $139.99 |
Same board as the PT-2SC with a tour grade flight case featuring
recessed and lockable latches and heavy duty handles. Case interior has additional
storage space for cables, spare pedals, and accessories.
Frame Size: 24x12.5x2 inches / weight 4 lbs.
Hard Case: 25.5x18x8 inches / weight 14 lbs.
Price: $249.00 |
|

A nice heavy duty cordura nylon gig bag is included with solid
panels sewn inside the walls, plus a large and roomy gusseted pouch on the exterior.
Frame Size: 32x16x3 inches / weight 7 lbs.
Soft Case: 34x18x5.5 inches / weight 7 lbs.
Price: $189.00 |
Features a new center reinforced frame design, with more space underneath to mount power supplies and power strips.
Comes in an ATA rated flight case with pro hardware lockable latches and low profile wheels on one end for effortless transport.
The interior storage compartment is separated by a solid divider wall.
Frame Size: 32x16x3 inches / weight 7 lbs.
Hard Case: 39x19x9 inches / weight 32 lbs.
Price: Special Order |
|
Delivers 2.0 amps of clean, quiet power. Includes 10' power cord with ferrite noise filter and locking jack. Auto-sensing circuitry
operates from 100-240 volts for use anywhere in the world.
Price: $25.99 |
|
The simplest, most effective, most affordable method for powering your 9-volt effect units. Advanced circuitry steps down high line
voltages to 9-volts and automatically supplies the required amount of current. 2.0 Amp current capability can power over twenty 9-volt effects.
The PA-9D Power-all System includes One x Cable-11 daisy chain connector, Two x 1/8" phone plug jumper cables (Blue), Two x barrel-type reverse polarity
jumper cables (Red), Two x battery clip jumper cables (grey), One x Line 6 Modeler Cable (Green)
and One x barrel-type extension jumper cable (Black) for over-sized effect units.
Price: $49.99 |
|
Used with the Power-All the Iso-Pump Voltage Converter is an inline voltage step-up converter that accepts 9 volts DC and increases it to an output voltage of 12, 18, or 24 volts DC at specific
current values. Output voltage is determined by position of the 3-way switch located on the unit's chassis. Input is standard polarity
Tip positive/Barrel negative female barrel connector and Output is standard polarity Tip negative/Barrel positive male barrel connector
Price: $29.99 |
|
This prepacked kit contains 10 feet of George L's .155 cable and 10 1/4" connectors.
A great system for customizing your pedalboard cables.
Price: $114.99 |
|
|
|